Every year as I am crafting ornaments to send near and far I am also pondering how I am going to package them. Some years I knew that I could easily slip them into a greeting card. Other years found me wandering the aisles of the grocery store looking for just the right sized boxes. (By Christmas Day my cupboards might hold a box of loose light bulbs, or loose envelopes of pectin.)
In 2004 my annual gift ornaments were Mill Hill Diamond ornaments. As I was stitching them I was thinking that they were just a wee bit too thick to slip into a greeting card. Then it occurred to me that I could easily fold a greeting card to accommodate the ornament. (My quilting ruler made this a very quick project.) That year my gift boxes were made from a 4" by 6" greeting card. They looked like this:
My illustrated (pdf) instructions for these boxes (that open at one end like a cereal box) can be seen or downloaded from this link: Flat Box from Greeting Card.
In 2005 my annual ornaments were Smocked Ornaments made from remnants from one of my Mom's square dancing skirts. In keeping with the recycling theme I folded boxes from recycled 5" by 7" Christmas cards. (Note that two sides of these boxes will show the back of the card.) These boxes looked like this:
>
My illustrated (pdf) instructions for these boxes can be seen or downloaded from this link: Boxes from Greeting Cards.
In 2006 my annual ornaments were Washi (decoupage) Eggs. In keeping with the "dairy" theme I fashioned greeting card boxes into a milk carton shape. They looked like this:
(No instructions for these as they are the same as the 2005 boxes with two of the top flaps up.)
In 2007 I stitched some ornaments that needed a flat box. This time they were just the right size to make a candy box type box from a 5 x 7 inch greeting card. They looked like this:
I didn't make any instructions for these boxes because I found a tutorial for similar ones at: http://craftypod.com/2007/10/29/how-to-make-a-gift-box-from-an-old-greeting-card
It later occurred to me that photographs and postcards would make a great tops for this type of box. Here is one I whipped up from a postcard. (The bottom is made from a card stock rectangle that is cut slightly smaller than the postcard.)
Note that in order to show all of the inscription I placed the tabs on the outside of this box.
In 2008 I stitched 15 sided three dimensional ornaments. I knew that these ornaments would be too big for a greeting card box and I wanted to make a box that would keep the tassels from getting bent. I ended up folding five sided boxes from 8 1/2" x 11" card stock. They looked like this:
My illustrated (pdf) instructions for these boxes can be seen or downloaded via this link: Five Sided Boxes.
In 2010 I used three sided boxes, that were really more of a wrap than a box, for some three sided ornaments. I made the prototype (second from the top in the photo below) using a recycled greeting card but made the rest using sheets of card stock.
The tutorials for making these boxes can be found on this blog page.
In 2011 I made my gift boxes from grey marbled card stock. Each piece of 12 x 12 inch card stock yielded two boxes.
I used the same style of box again in 2012 ...
and in 2016.
The tutorials for making these boxes can be found on this blog page.
In 2014 I wanted to make candy box style boxes that were 1 1/2" deep. My cards weren't quite big enough so I folded the front of the card to make a box top that is 3/4" deep and back of the card to make a box bottom that is 3/4" deep. Then I inserted a 1 1/2" strip of folded cardstock inside the box bottom to make it taller.
Bonus Tutorials
I also found a tutorial to make a pillow style box from a greeting card. Click on the photo to see the tutorial.
Here is a pdf for another template for a pillow style box. (You can shrink/ resize it with a photocopier.)
And I found a tutorial to make a triangular box from a greeting card. Click on the photo below to visit that tutorial.
For more tutorials and some printable boxes see the following pinterest album.
http://www.pinterest.com/pinwheelpond/paper-boxes/
Pinwheel 2008, 2009, 2010, 2012 and 2014
Subscribe to:
Post Comments (Atom)
You are amazing! Thank you so much. --Mavis
ReplyDeleteYou are very welcome Mavis.
ReplyDeleteWow! Thanks so much - I have downloaded the instructions and will have a great time making boxes for my ornaments! Monique
ReplyDeleteYou are very welcome Monique. Have fun picking out the cards for your boxes.
ReplyDeleteWow, you are amazing! What a lot of work. I hope that the recipients of your gifts know that they received two works of art!
ReplyDeleteHugs Hilly
Thanks for the words of encouragement Hilly.
ReplyDeleteI don't know about "works of art" but they certainly are easier (less work) and more fun than the boxes I used to fashion out of old cardboard boxes. The only problem is that now when I am picking out Christmas cards I find myself saying "these ones would make nice boxes." So far I have resisted the urge to start hoarding boxes of Christmas cards.
Awesome post! I've got literally boxes of christmas cards left over from a ST. Jude's card drive and i'll sure be using some of these ideas to use them up! Thanks!
ReplyDeleteHave fun Sherah! I keep finding quick and easy projects that would work well with recycled greeting cards. I've got the cards. Now I just have to find the time.
ReplyDeleteWould you have a pattern for a 6 sided needlepointed box with a fliptop. I've been looking for these instructions and not been lucky. Thanks for sharing your wonderful crafting
ReplyDeleteI'm sorry to say that I don't. I hope that you are able to find what you are looking for. I know how frustrating it is to search in vain.
ReplyDelete